The detailed description as well as the pin reference for TunerStudio is given in the user manual you received with your purchase.
PIN | Description | Comment |
---|---|---|
1 | SPK A | SPK A Out +5v |
2 | SPK B | SPK B Out +5v |
3 | SPK C | SPK C Out +5v |
4 | SPK D | SPK D Out +5v |
5 | LSU Heater - | LSU 4.9 PIN: 3 |
6 | LSU-IP | LSU 4.9 PIN: 1 |
7 | LSU-VGND | LSU 4.9 PIN: 2 |
8 | INJ A | INJ A Out - |
9 | INJ B | INJ B Out- |
10 | INJ C | INJ C Out - |
11 | INJ D | INJ D Out - |
12 | LSU +12V | LSU 4.9 PIN: 4 |
13 | LSU-NERNT | LSU 4.9 PIN: 6 |
14 | LSU-IA | LSU 4.9 PIN: 5 |
PIN | Description | Comment |
---|---|---|
1 | Launch IN | Switched GND |
2 | Table SW IN | Switched GND |
3 | CMP IN | Hall Type Only |
4 | Oil Pressure / Flex IN | Select on J2 |
5 | CAN H | |
6 | Knock IN 1 | |
7 | Knock IN 2 | |
8 | VVT Out | Negative, 36A |
9 | Aux Out 1 | Negative, 36A |
10 | Aux Out 2 | Negative, 36A |
11 | Tacho Out | Negative, 500mA |
12 | CAN L | |
13 | Fan Out | Negative, 500mA |
14 | Fuel Pump Out | Negative, 500mA |