Perceleris Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Satus 3 Pinout ======

The detailed description as well as the pin reference for TunerStudio is given in the user manual you received with your purchase. 

View from wiring side:

{{:satus:ampseal35-n.png?400|}}

^  AMPSEAL Pin N°  ^  Description  ^  Comment                                                                                    ^
|  1               |  SHARED 1     |  Shared PIN: External MAP IN / VSS IN                                                       |
|  2               |  TPS          |  Throttle Position Sensor                                                                   |
|  3               |  CAN H        |  CAN High                                                                                   |
|  4               |  CAN L        |  CAN Low                                                                                    |
|  5               |  GND          |  GND                                                                                        |
|  6               |  12v          |  12v Supply IN                                                                              |
|  7               |  5v           |  5v supply for TPS and external MAP                                                         |
|  8               |  SPK A        |  Spark A Output (+5v)                                                                       |
|  9               |  SPK B        |  Spark B Output (+5v)                                                                       |
|  10              |  SPK C        |  Spark C Output (+5v)                                                                       |
|  11              |  SPK D        |  Spark D Output (+5v)                                                                       |
|  12              |  Clutch IN    |  Clutch IN                                                                                  |
|  13              |  Knock IN     |  Knock Sensor Input                                                                         |
|  14              |  O2           |  O2 Sensor IN                                                                               |
|  15              |  MAT          |  Manifold Air Temperature Sensor IN                                                         |
|  16              |  CLT          |  Coolant Temperature Sensor IN                                                              |
|  17              |  CKP -        |  CKP Sensor - (Negative) IN                                                                 |
|  18              |  CKP+         |  CKP Sensor + (Positive) IN                                                                 |
|  19              |  CAM+         |  CAM Sensor + (Positive) IN                                                                 |
|  20              |  CAM -        |  CAM Sensor - (Negative) IN                                                                 |
|  21              |  SHARED 2     |  Shared PIN: Table SW IN / Flex Fuel Sensor IN                                              |
|  22              |  TACH OUT     |  Tachometer output signal (negative, very old tachometers may require tach adapter module)  |
|  23              |  FP OUT       |  Fuel pump relay output signal (negative)                                                   |
|  24              |  AUX OUT 1    |  High current general purpose output (negative, 36A)                                        |
|  25              |  AUX OUT 2    |  High current general purpose output (negative, 36A)                                        |
|  26              |  AUX OUT 3    |  High current general purpose output (negative, 36A)                                        |
|  27              |  AUX OUT 4    |  High current general purpose output (negative, 36A)                                        |
|  28              |  INJ D        |  Fuel injector D output (negative)                                                          |
|  29              |  INJ C        |  Fuel injector C output (negative)                                                          |
|  30              |  INJ B        |  Fuel injector B output (negative)                                                          |
|  31              |  INJ A        |  Fuel injector A output (negative)                                                          |
|  32              |  IAC 1A OUT   |  Stepper IAC 1A OUT                                                                         |
|  33              |  IAC 1B OUT   |  Stepper IAC 1B OUT                                                                         |
|  34              |  IAC 2B OUT   |  Stepper IAC 2B OUT                                                                         |
|  35              |  IAC 2A OUT   |  Stepper IAC 2A OUT                                                                         |